Tag Archives: woodwork

Almost done with the Tardis!

Been a little while since an update due to my starting the new job.

While I was at work the kid Started in on the signs for the top.  Went for all wood and painted using a stencil.  If we go full size I will definitely look into getting signs made.

Also, I think I see a table saw in my future.  All of the cuts here were made with a handheld circular saw or a hand skill saw, and it shows. (and it makes me sad).  But hey, this small one was more meant for fun and learning!

So here is where we are now:

We stuck the front door sign (phone box sign) on with Lamination and sticky back.

Whats left is the Lantern, and Window framing, and then some touch up painting!

Father Son 1/2 size TARDIS build

So, the wife and I have now made it through all of the new Doctors and I am slowly working my way through the classics, as well as catching up on Torchwood.

One of the thing that struck me was the Tardis.  I looked at it early on and thought…..I bet I could build one of those.  See, I love woodworking.  Especially odd ball stuff.  I designed and build a box for my cat to have his food and water in that we could see into, but the dog couldn’t get to it.  So I thought, “why not build a Tardis!”  Shortly afterwards my Son mention that we should do it as a team project.  Since he is prepping to join the military, I figured this was a good bond type of thing for us to do.

So, here we are.  For the last two months I have been browsing the forum Tardisbuilders.com, looking at everyone’s builds and gaining inspiration.  I know that I would have a few days off from work (just switched jobs) and it would be perfect timing for this build.  I eventually want to build a Full scale box but wanted to start small and get ideas.  This will help me build the larger one when it comes time.

So we started Wednesday and I made a point to try and take pictures along the way.

Since this is a 1/2 scale (ish) we started with a simple base frame:

We opted to have the walls be plywood (1/4 inch thick) and cut out the squares.

Sonic Screwdriver says Math is Hard!

Cutting out the squares:

Our Corner pieces are 4×1 inch paired with a 3×1 inch, 4 feet long:

With the walls attached (doors are just leaning)

And here we are after today.  Doors attached and everything mounted on the base:

So Thursday we got the backings on all the panels and added a roof to brace for when we add the tiers (and to hold everything in place.

Also, First Blood happened.  I almost always bleed somehow on every project.  Thankfully it’s only a small puncture.

You may also notice that the top is a tad shorter.  We cut off about 3 inches to solve the tall top problem.  our sinage will be about 3 inches tall so we should have maybe an inch of overage.

A big lesson learned here would be to save the door attachments until after the top is on.  We now will need to take the doors off and trim them up a bit as they stick when opening.  (Through warped wood or being 1/4 inch off.)  That’s one of the downsides to working small scale. even 1/4 of an inch can cause HUGE problems.  

Next stop, Lowes to pick up wood for the Signs and Roof!  I think we may look at doing a flat roof instead of the slanted as in 1/2 scale the difficulty curve is pretty high.

 

We painted on Saturday and that means some outside time.  I am so glad my shop is downstairs in the basement where it’s nice and cool.

So here’s where we are now: Took the doors off and started painting the main body, first coat.

While that was drying (and the wife helped with the second coat) the kid and I went down to build the roof.  here it is sitting on the top. (Not the actual lantern that will be used)

I bought some pre-cut plexi for the windows and left the frost plastic on them.

So that leaves us with the Signs, Window frames, and Lantern for the top.

I opted to not do the Phone box on the side door because of the material we are using being very thin and the overall size being very small.  On the plus side, the whole thing is extremely light!

Planter Box for Sarah. Spent all day Saturday building this from…

Planter Box for Sarah.

Spent all day Saturday building this from scratch.  Sarah wanted a raised planter-box for an herb garden out on the deck.  This is 7ft long, 2 1/2 ft wide, and 3 ft tall.  Still need to paint/treat the plywood inside base so it won’t rot.  Will try and get pics up next weekend when it is filled and in place.